Installing Sap Ecc 6.0

Hi Experts, I am trying to DXC SAP Business Content Datasource(2LIS11VAITM) from my ECC system to SAP HANA standalone. We have a remote BW system connected to this ECC system and the delta for this Datasource(2LIS11VAITM) is up and running. What I want to ask is if we DXC this datasource using the Embedded BW, will it affect the delta between ECC and remote BW system which is already set up? Please share your thoughts. Note: This is in reference to sectiion 2.5.3 in DXC installation guide(link is attached for reference). Thanks Sabal. Hello all,could you please clarify what I understood from the SAP documentations regarding the installation of the components mySAP ERP (ECC), Netweaver (XI) and SRM Server (SUS) on the same instance?- Do I need ECC 5.0 or ECC 6.0 to install SRM Server as an additional component on the same server?

SAP speaks of mySAP ERP b2005/b (which means ECC b6/b.0), but at the same time it says ECC b5/b.0.- I have to install SRM Server 5.0, not SRM Server 5.5?- I need the XI to transfer documents from the ECC component to the SRM Server component when I use the supplier portal (SUS)?- I have to configure each component as a separate client on the same system?Thanks a lot in advance for your help!Regards,Karsten. Hello Swapz N, There is no difference between ERP 6.0 ERP 6.0 IDES. Both are same. You can use the below link to check how to install ERP 6.0 with EHP4. Installation will go as you the screenshots that you can see from the above links. You can get the information about the installation guides using the following link. Regards Shrikant.

Hi Experts:I would like your expert opinion of the following. (Points will be rewarded for all posts)I have been tasked with setting up a DEMO environment involing Solution Manager 4 (SM4), ECC 6.0 (ECC) and Business Intelligence 7 (BI7).We would like this to be set up in such a way so that we could maximize Solution Manager and show its full functionality and capbility to our clients. I was thinking of setting up the landscape in the following order.3 Servers, OS: Windows, DB: MS SQL 20051. Setup SAP Transport Host (This will reside in SM4) This will be done as suggested in the SAP install guides.2.

Install SM4 through a Central Install (ABAP only System)3. Post Install Activities (From SM4 Installation Guide)4. Share the following in ECC (SAPTRANSHOST SAPMNT trans.) and share it with SM4. (So, essentially ECC shares the same transport directory)(I am not sure about the above step.please confirm here)5. Install ECC through a Central Install (ABAP only System)6. Post Install Activities (From ECC Installation Guide)7.

ECC-6.0 installation document. Install J2SDK1.4.12 set java_home in envoronment variable. Frist screen of sap installation. Check for result code=ok.

Share the following in BI7 (SAPTRANSHOST SAPMNT trans.) and share it with SM4. (So, essentially BI7 shares the same transport directory as ECC and SM4)(I am not sure about the above step.please confirm here)8. Install BI7 through a Central Install (ABAP only System)6. Post Install Activities (From BI7 Installation Guide)I do realize that we also need EP7 for BI7, but that is being planned for release 2, the client is only interested BW lite at the moment.Please feel free to critque the above and offer all alternatives. Thanks!I owe my SAP Basis Career to this site as I have learned so much here. Again, Points will be rewarded. Hi Folks,I have to install SAP Netweaver 7.03 (i.e.

Hi, We have installed CRM 7.0 EHP3 and we want to connected to our SAP ERP 6.0. The first question that we have is what must be the minimum SP stack that has to be installed in ECC so that communication between CRM and ECC is correct. The second question is: We have found CRM Connectivity (C71) Building Block Configuration Guide, EHP3 for SAP CRM 7.0. The problem is that this guide refers to steps that we must apply to CRM system only(not to ECC). An older guide, for example 'CRM Connectivity (C71) Building Block Configuration Guide, SAP CRM 7.0 EHP1' has steps for both CRM and ECC systems.

Is there another Guide that we must follow so that to connect CRM EHP3 to ECC 6.0? Thanks in advanced.

Hi Gurus, I am new to Netweaver platform.We are using SAP R/3 4.7 version.Now I want to install our sand box on ECC6 netweaver 7.0 platform on windows 2003 Oracle 10g platform.I have DVDS from SAP now I already install Oracle 10g and after that I use SAP Installation Master -SR1 DVD but in this DVD I get 2 option 1. SAP ERP 6.0 EHP4 Ready-Support Release 1 2. SAP Netweaver 7.0 including Enhancement Package -1 Support Release -1 I am not able to understand select which one.I also try application server where it ask for profile.Here there is no option for Database instance or central instance.

Please guide me which DVD I use and also step for install it.I am waiting for your help. Regards Nirmal. Dear experts, We are having ECC 6.0 system running on Windows 2003 MSSQL platform. We have performed java Add IN activity, since system is running fine but when we execute transaction SM21 we get lot of junk chanracters as show below. I have found 2 notes relevant 688089, 45580 which talks about deletion of Slog files and restart SAP and OS But i dont have files called Slog under location usr sap SID SYS global Please advice a workaround.

Dear Experts, Need an urgent assistance on the following questions. We have in IDES currently. In IDES we have ECC 6.0 EHP 4. We do not have ESS in ECC 6.0 IDES. However, My team wants to implement ESS in IDES ECC 6.0 in EHP 4.

Kindly please share the documentation regarding the Installation functionality. If we will go for IDES ECC 6.0 EHP 5 in ESS, then also please provide me the installation guide Functionality. Or if you have any documentation for ESS in IDES ECC6.0 in EHP 5.

And is that possible that we can Upgrade to ECC 6.0 EHP 6 in IDES Server. Or can we avail the opportunity of IDES ECC 6.0 EHP 6 in ESS.

Need your urgent assistance on the same. Regards, D R Choudhury. Hi All, We know that SAP has started to support HANA on Business Suite Applications. We are in the process of leveraging SAP ECC on HANA.

We are looking for some docs which would guide us in migrating to SAP ECC on HANA, below are few of my questions: 1. What are the pre requisites, for migration from SAP ECC to HANA, currently our ECC EHP5 is on MSSQL database. Do we need to upgrade ECC to EHP6?

What are the platforms supported by ECC on HANA? How will the migration happen? I checked installation guides for the same and did not find one, could you share any? Regards, SBK.

Dear Experts, My current system SAP ECC 6.0 EHP4 SAPABA 701 0008 SAPBASIS 701 0008 SAPAPPL 604 0009 EA-APPL 604 0009 Now we want to upgrade from EHP4 to EHP6 we also have 53006458 SAP Netweaver 7.0 EHP3 etc also have 53006114 set - SAP ERP 6.0 SAP EHP6 51040246 SAP Enh. Package 6 for sap ERP 6.0 51041989 SAP ERP 6.0 SAP EHP6 installation EX. 51041994 SAP ERP 6.0 SAP EHP6 Upgrade Export 51041990 SAP ERP 6.0 SAP EHP6 language 51041991 BS7i2011 java components 51041992 SAP EPR 6.0 EHP6 Components I dont want to connect our system to solution manager and generate Stack.xml file Because it will take month to release patches which in move to export ( due to sap export policy) Please guide me we can upgrade EHP4 to EHP6 from above media and what is the procedure to upgrade from EHP4 to EHP6 Regards Shahid. As you have put your problem in 'SAP on Windows' category, mean OS is Windows. Then Question is - is it 32bit OS or 64bit OS. Basic Software requirement for Install SAP ECC5/ECC6. Java 1.4.2.XX b).

You have to define JAVA path in Enviornmental Enviorment. Recommended Virtual Memory is Approx 20GB.

Download Inasttalion Master,Kernal, Export Dump, RDBMS, RDBMS Patch, Oracle Client for 32bit(x86) or 64bit Windows. Install Oracle First then Oracle Patch. Now start SAP installation. Software Download link: E E' SAP ERP' SAP ERP 6.0 Basic documents are available: Regards, Gokul Chandola. Dear All expert, we are running SAP ECC 6 on HA windows cluster on windows 2008 enterprise, but unfortunately our SAP SID cluster group has been accidently deleted by one of our vendor, we do not have a cluster database backup, so we have to manually recreate the SAP cluster group. I have refer to the ECC installation guide and have recreated the SAP cluster group with client access point, storage and file server resource, but I have no idea how to create the ASCS instance resource and its dependencies.

As such, could anyone share the setting (ie properties and dependencis) for SAP ASCS instance. Thank you in advance. Dear Sahil, which cFolders release do you want to install? For example, release 5.0 is shipped together with SAP Portfolio and Project Management 5.0, which is included in software component CPRXRPM 500702.

Portfolio and Project Management must not be actively used in order to use cFolders. Please refer to SAP's FAQ note 1377104 with regard to the system requirements and installation options. Basically, you can install cFolders on top of an ECC 6.0 system or stand-alone on a separate instance. In case you use ONLY INTERNAL collaborations, the installation can consist only of one server with cFolders installed on ECC.

However, if you intend to use EXTERNAL collaborations it is strongly recommended to install cFolders and the ECC on 2 different servers (due to security reasons). Please see more detailed information in the Security Guide in the SAP Help Portal (under: SAP Business Suite SAP Product Lifecycle Mgmt. SAP Project and Portfolio Management Unfortunately, there is no cFolders Configuration Guide for 5.0 but the one for 4.5 is still valid and can be found under following link: 95403d9e30000a114084/frameset.htm Best regards,Silvia.

Hi experts, I want to ask a question. I read that 'For SAP xRPM, SAP supports only a stand-alone installation on SAP NetWeaver' on Project and Portfolio Management Overview section of master guide 'SAP Project and Portfolio Management 4.5 using SAP NetWeaver 7.0'. I understand that we could not install SAP xRPM 4.5 core ABAP componenton ECC 6.0, CRM 2007, or any other SAP system based on Basis 7.00. Can we install this component only to SAP NetWeaver 2004s Application Server ABAP? Best Regards.

Dear All, We have performed installation of ECC 6 on Production server with ABAP and JAVA stacks. Know we need to perform installation of BW/BI 7.0 on separate server. Do I need to perform same steps in the installation of BW/BI 7.0 which I did in ECC 6 Production server installation and then I have to perform post installation steps for BW/BI 7.0 if yes then can any buddy provide me the guidance. If there are another steps involve you are requested to please give me reference of step by step installation guide. Regards, Danish. Hi Experts, We are goin to setup Installation of temporary 3-Tier SMP2.3, WM6.0 and IM3.2 system landscape.

Dear friends, I am ABAP consultant, new to ABAP Webdynpro. In my company SAP system is upgraded to ECC 6. I tried with Web Dynpro application given in TechEd, but not able to test the Web Dynpro application as it showing page cannot be displayed with path In administrative data URL showing the following path: Is is the valid path?, or how can i set the valid path? OR any Web Dynpro specific installation is required for ECC 6. Kindly suggest, thanks, Praveen Lobo. I have a tremendous confusion, may be because I continue embracing 46C R/3 concepts in my mind. This year, I must upgrade from 46C R/3 unix/oracle to the last corresponding SAP version, in this case SAP ECC 6.0 (or SAP ERP 6?) unix/oracle.

I wanted to read the indications for the upgrade and I found four upgrade SAP guides for doing this: 1) Upgrade Guide SAP ERP 6.0 Including Enhancement Package 4 Support Release 1, ABAP Based on SAP NetWeaver 7.0 Including Enhancement Package 1 2) Upgrade Guide SAP Systems Based on SAP NetWeaver 7.0 Including Enhancement Package 1 3) Upgrade Guide SAP Enhancement Package 4 for SAP ERP 6.0 ABAP Based on SAP NetWeaver 7.0 Including Enhancement Package 1 4) Upgrade Guide SAP ERP Central Component 6.0 ABAP Support Release 3 According to my situation, which one should I begin to read? Hello Experts! Our organization has acquired a business which was using SAP 4.6 and as a global organization, we are using ECC 6. In SAP 4.6, the business was using about 15 document types for managing various kind of documents.

Now as a global organization, we have defined only two document types in ECC 6 to meet all kind of requirements (ECM controlled Non-EM controlled), also we've defined about 15 additional characteristics for better search functionalities. These additional characterisctics were not the part of SAP 4.6 documents. Now we need to migrated the documents fro SAP 4.6 to ECC 6, and map all those 15 doc types to our 02 doc types alongwith additional characteristic definition. Can anybody guide me on how to achieve this? Thanks and Regards, Deepak.

Hello Experts! Our organization has acquired a business which was using SAP 4.6 and as a global organization, we are using ECC 6. In SAP 4.6, the business was using about 15 document types for managing various kind of documents.

Hello Friend I am interested to Know that what are the preconfiguration required for installation of ECC 6.0 (Dev system) like At the time of installation, 1. Install win 2003 with latest patch 2. Installation of Database( Oracle or MSSQL) 3. Then Is loop back adpater is requirred? What entery should be maintain in host file in directory Driver? BC set are already activated?

Or should be import? How to check the which BC set are available? Some of consultant facing problem like at the time of material master enter then only few view or option are available then how to check?

I have some basis knowldge but not at this level. I have already install the IDES 6.0 but i know actual SAP and IDES installation is different things. Hope anybody guide me Thanks Ganesh. Hello, I am trying to install SAP ECC 6 SR1 on Windows Server 2003 and Oracle Database. I am getting the following Error INFO Creating SAP system ports for DEV (my SID) Error: FSL-02010 - Unable to set time for the file C:/Windows/system32/drivers/etc/services.2 i surfed the net and other forums to analyze what the issue might be. They all point out that i have to check the permissions on my windows.

I checked the installation guide also for this. But I am performing the installation with Ultimate administrative previlages. Also, i found in the installation guide that sap system ports are created in the file./drivers/etc/services. Why is my installation creating a second Services file named Services.2?

Can you suggest me what the problem might be? Regards, Bharat Edited by: gbharatk on Jul 16, 2011 9:32 AM.

Hi, SDN fellows.I need to install SAP Solution Manager and generate Solution Key for SAP ECC EHP4 IDES.I plan to install in the same environment where we are installing SAP ECC 6.0 IDES (with MS SQL server 2008 R2 and MS Window server 2008 R2). Do you know which install files I should download?I quickly went through the installation guide and the installation page in SMP for SAP SOLUTION MANAGER 7.0 and 7.0 EHP 1. Seems like only EHP 1 supports MS SQL 2008 R2.

(RDBMS MSSQLSRV 2008 R2 incl. I decided to install Sol. Manager 7.0 EHP 1. Since I have MS SQL 2008 R2 installed, do I still need to execute install these files RDBMS MSSQLSRV 2008 R2 incl. CU1 1-6?Actually, all I want is to generate solution key using Solution Manager. Do I need to order permanent key from our sales rep. / through SMP?

Or I can achieve this purpose with temporary key (unless I can get it within 24 hours after OSS request sent) and will worry about the permanent key at later time.Thanks,KC. Hi All, I am facing issue while import data from SAPto FIM. Currently i am using below SAPdetails: (1.

SAP GUI Version 7.2 (2. SAP System data component version: SAP R/3 Enterprise Error I facing in event viwer: Log Name: Application Source: FIMSynchronizationService Date: 3/20/2013 1:27:43 PM Event ID: 6801 Task Category: Server Level: Error Keywords: Classic User: N/A Computer: down1072.laccdd.com Description: The extensible extension returned an unsupported error.

The stack trace is: System.NullReferenceException: Object reference not set to an instance of an object. Hi All, I am installing ECC 6 dual stack on MSCS. I am now installaing CI on CI node.I have already installed DB instance on DB node.

I have followed all other steps as per the installation guide. I am now facing the follwing error in CI installation step. Execution of the command 'E: usr sap SID DVEBMGS02 exe sapstartsrv.exe -r -q -p ECCSAP1 sapmnt SID SYS profile STARTDVEBMGS02POLTFMSECCCI -s LFP -n 02 -U LNTFINSVCS SAPServiceLFP -P XXXXXX -e LNTFINSVCS lfpadm' finished with return code -1.

Output: Service not started. Service SAPSID02 is not getting started. The error in the event log is below. The description for Event ID 0 from source SAP????? Cannot be found.

Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: Initialization failed.

Service not started. ntservmain.cpp 1497 I have tried to start the service manually and deleted and recreated the service using sapstartsrv.exe. Still no luck. The service is created in services.msc but it is not getting started. Please suggest any solutions. Regards, Dinakar. HI Iam planning to install ECC 6 EHP 6 with oracle db on AIX 6.1 system.

Its a fresh installation, so i downloaded SWPM as per the installation guide the file is 70SWPM10SP016-20009697.sar later i downloaded the SAPCAR filr from smp SAPCAR35.EXE i copied both these file in to a directory on my AIX system. 1)how can i run the SAPCAR command now, as it showing as.exe file for the same reason i copied the older SAPCAR from another system and run the command as follows SAPCAR -xvf 70SWPM10SP016-20009697.sar then it is giving the error as follows ksh: SAPCAR: not found. Even i renamed the SAPCAR35.EXE to SAP CAR and executed the above command the same output results in.

Can any one guide me how to start the SWPM tool to start my installation Regards. Hello,I am trying to install ECC 6 EHP5 (Windows + Oracle 11.2), i was looking for the media list, but in the installation guide they refer to Netweaver media list. And in the installtion page on SAP marketplace there are lots of parts for WIN +ORACLE to download.in the media list it is really complicated to know which DVD to download and install.I have read the installation guide for ERP - then for netweaver but it is really getting me more confused.Is it really necessary to install Netweaver before insatlling ECC?Can somebody please explain which DVD to download as it seems really complicatedEdited by: Hassan Khanafer on Sep 19, 2011 10:09 AM. Hi, We are facing following error during the installation of ECC EHP7 IDES - Package checker failed after ABAP import process. (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/share/vm/runtime/thread.cpp:5423): VMCOs::init failed 4220 0.02 0x00000003 ERROR occured (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/share/vm/sap/jvmEnv.cpp:133): VMCOs::init: Initialization of the control area failed 4220 0.01 0x00000002 ERROR occured (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/share/vm/sap/controls.cpp:275): Controls::init: Could not create control area. Maybe old VMs are still running. 4220 0.00 0x00000001 ERROR occured (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/os/windows/vm/oswindows.cpp:5025): os::createcontrolarea: Could not create or open file mapping (filename=Local sapjvmfilepid1208 0) (size=45760) (error=5) Could not create the Java virtual machine.; Please suggest to resolve it.

Thanks Regards, Kajendrakumar. Hi, We are facing following error during the installation of ECC EHP7 IDES - Package checker failed after ABAP import process. (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/share/vm/runtime/thread.cpp:5423): VMCOs::init failed 4220 0.02 0x00000003 ERROR occured (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/share/vm/sap/jvmEnv.cpp:133): VMCOs::init: Initialization of the control area failed 4220 0.01 0x00000002 ERROR occured (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/share/vm/sap/controls.cpp:275): Controls::init: Could not create control area. Maybe old VMs are still running. 4220 0.00 0x00000001 ERROR occured (d:/depot/bas/sapjvm/61REL/src/6/hotspot/src/os/windows/vm/oswindows.cpp:5025): os::createcontrolarea: Could not create or open file mapping (filename=Local sapjvmfilepid1208 0) (size=45760) (error=5) Could not create the Java virtual machine.; Please suggest to resolve it.

Thanks Regards, Kajendrakumar. This query is regarding Installation of IDES ECC 6.05 Query1.

Can IDES 6.05 be installed on Oracle 11g? Reason of Query: If we go to download ECC 6.05 IDES version, SAP Application Components - SAP ERP - SAP ERP ENHANCE PACKAGE- EHP5 FOR SAP ERP 6.0-IDES we are getting Oracle 10g Media in the list only whereas for dowloading ECC 6.05 (non IDES) we are getting Installation Master for both 10g /11g eg. 5104087911 BS7i2010 Inst.Mst.

WIN Server x64 64bit Oracle 10.2/11.2(ECC - Non IDES) So it leaves a confusion to me whether IDES ECC 6.05 can be installed on Oracle 11g. No Installation guide for IDES ECC 6.05 found in servicemarketplace adds futher to the confusion.

Shall I take Installation Guide for ECC 6.05 as same for IDES version,recommending Oracle 10g/11g both? We are planing to Install ECC 6.05 (ABAP+JAVA) Instance. But while looking for Installation guide I am finding seperate guides for ABAP and JAVA (ABAP+JAVA link missing).

So does it mean, installing ABAP+JAVA is not recommended? Yours sincerely Asad Momin. Hi Bhavesh,The frequency of upgrading Support packages on your landscape,can be decided based on your need. If your current stack works without any issues, then you dont have to perform an upgrade every time there is a new SP released. But if you require a bugfix or an additional feature which is available in a latest SP, then you can perform an upgrade. So you can do it on a need basis also, if you find regular upgrades too cumbersome.Having said that, it is a good practice to upgrade atleast once an year. Its okay to skip 3-4 SPs, but after that you should upgrade.

Since you have different Q and prod systems, the risk is minimum.You can upgrade only components that you use. SAPABA and SAPBASIS have to be patched always.Regards,sangeetha. SAP Adapter BizTalk Adapter Pack 2.0: Supported server versions: SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode SAP Adapter BizTalk Adapter Pack 2010: Supported server versions: SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0 None specifically says it supports ECC 6.0 EHP5. But, I was able to find several posts that they are integrating with SAP ECC 6 EHP5 using BizTalk adapter. However, I would like to make sure whether Microsoft officially supports or not in case of technical issue occurs. Does anyone have an answer?

Hello experts, Before describing any think let me tell u that i am very new to this field. We are configuring SAP Enterprise Project Connection 2.0 in our SAP ECC 6.0 EHP6.I have already installed ABAP add on for EPC in ECC system. I have also installed trial version of primavera6 in another system.So now how can i connect my ECC system to Primavera6 through Enterprise Project Connection(EPC). I have gone through the installation guide for SAP Enterprise Project Connection 2.0 SP2.But i could not get any clear idea. Any reply is helpful for me. Thanks Debasis. I am trying to setup a new Installation of ERP 6 SR3 on Windows platform (Windows 2008).

On the download website, i see 6 downloads of 'SAP ERP 6.0 SR3 Installation Export 1 to 6'. Are these 6 downloads the only thing that i need to download to install a new ECC system or should i be downloading something else as well.

I plan to install it with MAX DB. There are a bunch of upgrade master and upgrade export files for download there as well - but i am assuming these are only for upgrading an existing ECC install.

Hi Anil, I recently installed the Production system in the same environment. Please go through the installation guide Section 8: High Availability with Microsoft Cluster Service. Please refer this section completely, let me know if you have any doubts. Estimate and prepare the file system. OS ADMIN will Configure the cluster and shows the report.

The report should not contain any errors and warnings. List out the IP addresses and Hostnames (refer the section 8.2.4 IP Addresses in an MSCS Configuration). Map the IP addresses to Hostnames.

Thanks Kishore Cherukumalla. Hi Singh, The requirement is not clear.

However, in the operating plant there are several changes are expected and those changes have to be recorded in SAP System. You need to develop a change request procedure for your business. Hi Ravi the following are my answers to your points: 1) Can we install SAP for Professional Services pack on a running ECC 6 system? Yes 2) What is the Impact on existing ECC 6 on this installation?

No impact on the existing set up. We have to add cProjects suite with ECC 6.0. 3) What are the perquisites for Installing SAP for Professional Services? If you are looking for full IS-Professional Services then you need CRM, ECC, cProjects and BW.

If your organization is into NPD and if you have critical mass in resources then you can go for xRPM also. 4) Integration with Microsoft EPM server possible? To which extent?

I don't know exactly what is EPM? 5) Is SAP for Professional Services is available in any SAP Enhancement Package for ECC 6? ECC 6.0 service pack 11 will have some part of modules specified above. But CRM and BW are seperate modules, which needs to be installed seperately.

You can award points if at all this info helps you. Apart from can you eloborate on your requirement. I can help you if at all you are interested. Regards Suresh. Dear All, Our current System is on Linux 5 and oracle 10g, below are the support pack levels.

We are on SAP ECC 6.0. We would like to perform the pre-production system copy on to Linux 6 and Oracle version 11g using SAPINST installation master. Please guide me in identifying the SYSTEM COPY GUIDE and Installation master. Note: We do not want to use software provisioning manager 1.0 1.

Can i consider the above system copy as heterogeneous? SAPBASIS70027SAPKB70027SAP Basis ComponentSAPABA70027SAPKA70027Cross-Application ComponentPIBASIS2006170017SAPKIPYM17Basis Plug-In (PIBASIS) 20061700ST-PI200817007SAPKITLRD7SAP Solution Tools Plug-InSAPBW70029SAPKW70029SAP NetWeaver BI 7.0SAPAP70027SAPKNA7027SAP Application PlatformSAPAPPL60310SAPKH60310Logistics and AccountingSAPHR60022SAPKE60022Human Resources Thank you. Regard's Sai.

Dear SAP gurus, I have this request to try to use MCOD in our SAP Landscape in oder to consolidate 2 SAP systems in one Oracle Database and I came up with several questions: 1. Our SAP landscape is composed of a SAP Solution Manager, SAP PIs and SAP ECCs (all ABAP-Java) and SAP Portals (Java). I have read on the following link that the recommendation is not mixing development and production systems or OLAT/OLTP systems, so my first idea would be cosolidating for example ECC dev with Portal dev and XI qas with ECC qas. Does this makes sense? Procedure If we decide to use the same Oracle database for ECC dev and Portal dev. How could we consolidate both Oracle databases in one?Please let me know if the following suggestion makes sense?

-We have ECC dev with SID 'ECC' with DBSID 'ECC' and schema-ID 'SR3' -Install a new SAP Portal System from scratch on the ECC dev Oracle DB (DBSID =ECC) but with a different schema 'PTL'.Perform a homogeneous copy from Portal dev system into the new installed empty Portal system which is located in DBSID 'ECC' Oracle DB. Is there an easier way to perform the consolidation of 2 SAP systems? I did not find either a specific part on the installation guide to install a SAP System using MCOD. Has anyone experience with MCOD? Any suggestion is very appreciated. Thanks in advance, Marc.

I am installing SAP ECC 6.0 IDES central system on RHEL4 x8664 bit with Oracle 10g. Oracle db installation and create database steps have completed successfully. Hate story 4 full movie. It is now on 'Create/Check Tablespaces' of SAP installation and came across an error. Below, please see the last few lines of sapinst.log showing the error message. INFO 2008-12-24 13:20:18 Account oram1s already exists. INFO 2008-12-24 13:20:18 Account dba already exists. ERROR 2008-12-24 13:20:18 CJS-00030 Assertion failed: Component OraDatabaseTablespaces2: Context parameter templateDirectory is not valid.

The follo wing files are missing: TABLESPACES.XML ERROR 2008-12-24 13:20:18 MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined. ERROR 2008-12-24 13:20:18 FCO-00011 The step checkStepPreconditions with step key NWOnehost ind ind ind ind 0 0 NWOnehostSystem ind ind ind ind 1 0 NWCreateDBandLoad ind ind ind ind 10 0 NWCreateDB ind ind ind ind 0 0 NWOraDBCheck ind ind ind ind 0 0 NWOraDBMain ind ind ind ind 0 0 NWOraDBStd ind ind ind ind 3 0 NWOraTablespace2 ind ind ind ind 6 0 checkStepPreconditions was execut ed with status ERROR.

Can anyone please guide or help me resolve this issue? Appreciate your help! Thanks, Dhimant.

Hi all, Your message it's so old. Doesn't matter, I got the same issue when I have tried to install a unicode SAP Netweaver 7 Ehp 2 ABAP stack on Aix 5.3 TL10 with oracle 10.2. It's seems that the issue trigger by ulimits parameters for oracle user orasid.

The error message I got was: OraDataFileCreateParams.checkParams: dataFileParams.sapdataDir is not convertible to a positive integer and does not match /^ sSAPDATA( d+) s$/gi. ERROR 2011-03-01 19:40:25.97 iaxxinscbk.cpp:244 CJS-00030 Assertion failed: Component OraDbBuild: Context parameter tDataFileInfo, row13 does not describe valid data file parameters. To fix this issue, You should have a look in the file /etc/security/limits, you must have for oracle user orasid the definition below:. orasid: fsize = -1 data = -1 stack = -1 fsizehard = -1 cpuhard = -1 datahard = -1 stackhard = -1 corehard = 2097151. If not, update the file. Then logout, after that login and restart your installation process.

I hope this makes sense and gives the information to any body who is facing on the same error message. WAMBO Edited by: rwambo on Mar 11, 2011 6:41 PM. Dear All,While searching for Installation Guide in SMP for ECC 6.05 NW 7.02it is found that Installation Guide is either available for ABAP Stack or Java Stack.I am not able to find the Installation Guide for ABAP+JAVA.Does it mean that Installation of ECC 6.05 NW 7.02 ABAP+JAVA single installation is1)Not Supported?OR2)Not Recommended but supported?In either of the case, a supporting SAP Note is highly appreciated.OR3) The Installation Guide for ABAP +JAVA Installation guide is available in SMP.In this case please guide me to the document availability.Sincere RegardsAsadul Momin. Hello, I am trying to install SAP ECC 6 SR1 on Windows Server 2003 and Oracle Database. I am getting the following Error INFO Creating SAP system ports for DEV (my SID) Error: FSL-02010 - Unable to set time for the file C:/Windows/system32/drivers/etc/services.2 i surfed the net and other forums to analyze what the issue might be. They all point out that i have to check the permissions on my windows. I checked the installation guide also for this.

But I am performing the installation with Ultimate administrative previlages. Also, i found in the installation guide that sap system ports are created in the file./drivers/etc/services. Why is my installation creating a second Services file named Services.2? Can you suggest me what the problem might be? Regards, Bharat.

Yes, it's possible, but if you want to test against BAPIs the only thing you're left with is either a full-blown installation and customization project - I think we can safely rule that out - or an IDES installation. The reason is that with all of the free test drives I know of, you only get the development environment, but not the ECC core with the business logic - and the BAPIs are part of the ECC core. Take a look at - they seem to offer a free IDES access that might be sufficient for your purposes. If you want to install IDES on your own box, you need to be a SAP Customer or Partner with a valid license - if you are, go to service.sap.com/ides - and remember to buy a Really Big Machinetm.